3.3 Save Data Command; 3.3.1 Save specified type; Save Data Command - Page 511

APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 7 

3.3

Save Data Command 

3.3.1

Save specified type 

Command 

ESC CR ! 12345F type(4byte) size(4byte) data... 

** type = MCRO, DATA 

Available Devices 

F, A, H 

Description 

This command saves data of the specified type with the data ID which is set with the 

ESC & f # Y

 (Macro 

ID Configuration) command.  

If there is insufficient memory in the printer to store the data, a memory full error occurs. 

When the printer supports two or more storage devices, the command saves the data onto the device specified by 
the select storage device command.  When only one device is enabled, the command saves onto that device. 

Error 

HL-1660e/2060/2400C: 

34 MEMORY FULL  

43 CARD1 W ERROR 

43 CARD2 W ERROR 

HL-2400Ce/3400CN 

43 DEVICE1 W ERROR 

43 DEVICE2 W ERROR 

43 DEVICE3 W ERROR 

HL-2460/3260N/2600CN/3450CN/7050: 

43 CARD ERROR 

43 HDD ERROR 

HL-
1650/1670N/1850/1870N/5070N/5170DN/5270DN/5280DW/5380DN/6180DW/5470DW/5450DN/5440D/S7000DN: 

43 SERVICE E74

HL-6050/6050D/6050DN/8050N/2700CN: 

43 CARD ERROR