Go button; Job Spooling; Use Reprint- Page 63

Control Panel

55

4

Go button

4

The 

Go

 button has the following functions:

„

Cancel printing

Cancel only the printing job:
While printing press the 

Go

 button for about 4 seconds until all the LEDs light up. The 

Ready

 and 

Error

LEDs will flash as the job is being canceled.
Cancel all the received jobs:
To delete all jobs, press the 

Go

 button for about 4 seconds until all the LEDs light up and then release it. 

Press the 

Go

 button again. The 

Ready

 and 

Error

 LEDs will flash as the job is being canceled.

„

Wake-up

If the printer is in sleep mode, press the 

Go

 button to wake the printer up and go to the Ready state. 

„

Error recovery

If there is an error, the printer will recover automatically from some errors. If an error is not automatically 
cleared, press the 

Go

 button to clear the error, and then continue to use the printer.

„

Form feed

If the blue 

Ready

 LED blinks for a long time, press the 

Go

 button. The printer will print any data that is left 

in the printer’s memory.

„

Reprint

To reprint the last document, press the 

Go

 button for about 4 seconds until all the LEDs light up and then 

release it. Within 2 seconds press the 

Go

 button the number of times you want to reprint. If you don’t press 

the 

Go

 button within 2 seconds, a single copy will be printed.

If you want to use the reprint function open the driver's 

Properties

 dialog box and go to the Advanced tab, 

select the 

Device options

 icon and click 

Job Spooling

 and then check the 

Use Reprint

 check box. See 

Device Options

on page 34.