How to configure your wireless printer, using the one-push wireless setting mode; How to configure your wireless printer, using the one-push ; wireless setting mode- Page 77

Wireless configuration using the one-push wireless setting mode (For HL-2170W)

70

6

How to configure your wireless printer, using the one-push 

wireless setting mode

6

IMPORTANT

If you are going to connect the printer to your network, we recommend that you contact your system 
administrator prior to installation.

a

Press the wireless setup button located at the back of the machine for less than 2 seconds as show in 
the illustration below. This will put the printer in one-push wireless setting mode. This feature will 
automatically detect which mode your access point uses for one-push configuration 
(SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™) of your printer.

Note

• Use a pointy object such as a ballpoint pen to press the button.
• If you press the button for 3 seconds or more, the printer will change to the PIN Method of the 

Wi-Fi Protected Setup™ mode. See 

How to configure your wireless printer, using the PIN Method of Wi-Fi 

Protected Setup™

 on page 80.

b

The printer starts the one-push wireless setting mode.
The printer searches for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup™ or 
AOSS™ for 2 minutes.

c

Put your access point in the SecureEasySetup™ mode, the Wi-Fi Protected Setup™ mode or the 
AOSS™ mode, depending on what is supported by your access point. Please refer to the instruction 
manual that came with your access point.