Using ARP to Configure the Print Server IP Address; Windows® Systems; Using ARP to Configure the Print Server IP - Page 105

TCP/IP CONFIGURATION 10 - 6

Using ARP to Configure the Print Server IP 
Address

If you are unable to use the BRAdmin application or the printer’s 
control panel and your network does not use a DHCP server, you can 
also use the ARP command. The ARP command is available on 
Windows

®

 systems that have TCP/IP installed as well as Unix 

systems. To use arp enter the following command at the command 
prompt:

arp -s ipaddress ethernetaddress

Where 

ethernetaddress

 is the Ethernet address (MAC address) 

of the print server and 

ipaddress

 is the IP address of the print 

server. For example:

Windows® Systems

Windows

®

 systems require the hash "-" character between each digit 

of the Ethernet address.

arp -s 192.189.207.2 00-80-77-31-01-07

Unix/Linux Systems

Typically, Unix and Linux systems require the colon ":" character 
between each digit of the Ethernet address.

arp -s 192.189.207.2 00:80:77:31:01:07