Printing Methods- Page 29

Printing Methods

20

2

f

While pressing the paper-guide release lever, slide the paper guide to fit the paper size.

g

Send the print data to the printer.

Note

• Remove each sheet or envelope at once after printing. Stacking the sheets or envelopes may cause the 

paper to jam or curl.

• If envelopes get smudged during printing set the 

Media Type

 to 

Thick Paper

 or 

Thicker Paper

 to 

increase the fixing temperature. 

• If the envelope is creased after they are printed, see 

Improving the print quality

on page 160.

• (For Windows

®

 users) If DL size double flap envelopes are creased after printing, choose 

DL Long Edge

in 

Paper Size

, from the 

Basic

 tab. Put a new DL size double-flap envelope in the MP tray with the longest 

edge of the envelope in first, then print again.

• When you put paper in the MP tray, remember the following:

• Put the leading edge (top of the paper) in first and push it gently into the tray.

• Make sure that the paper is straight and in the proper position in the MP tray. If it is not, the paper may 

not be fed properly, resulting in a skewed printout or a paper jam.