NetWare protocol configuration- Page 83

6 - 21 NOVELL NETWARE PRINTING

b

Select the Brother print server from the list of print servers. 
When you get the message that the print server is connected, 
press the ENTER key and type the default password 

access

in response to the 

# 

prompt (the password will not echo) and 

then press the ENTER key again in response to the 

Enter 

Username>

 prompt. When you get the 

Local>

 prompt, type:

SET NETWARE NPRINTER nlm number ON service
SET NETWARE RESCAN
EXIT

■

Where 

nlm

 is the name of the PSERVER NLM on your file 

server.

■

Number

 is the printer number (this must match the printer 

number you selected during the PCONSOLE configuration 
in the previous steps).

■

Service

 is the name of the service assigned by NetWare 

print server name (where the default services are 

BRN_xxxxxx_P1

 for the Brother printer, where 

xxxxxx

 is 

the last six digits of the Ethernet address (MAC address)).

For example, to set up remote "Printer 3" for a Brother printer with 
the print server BRN_310107_P1 using the PSERVER NLM called 
BROTHER1PS, you would type:

SET NETWARE NPRINTER BROTHER1PS 3 ON BRN_310107_P1
SET NETWARE RESCAN
EXIT

■

You can also enter the remote printer name using your web 
browser, by connecting to the Brother print server using the TCP/
IP protocol and selecting the NetWare protocol configuration.

The same services assigned by NetWare print server name 
cannot be used for both queue server mode and remote 
printer mode.

You must now unload the PSERVER NLM from your 
NetWare file server console and then reload it in order for the 
changes to take effect.