3.1.4. PJL staple on/off; 3.1.5. PS staple on/off; Format - Page 549

Brother HL-7050N Command Reference Guide for Software Developers

Table of Contents

Technical Reference Guide
GLOSSARY
background image

 

 

APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 5 

3.1.4.

 

PJL staple on/off  

Format 

@PJL SET/DEFAULT STAPLE=

StapleName

 

Parameter 

StapleName* 

 

UPPER LEFT: 

Select the upper left of the Finisher/Stapler unit 

 

UPPER RIGHT: 

Select the upper right of the Finisher/Stapler unit

 

LOWER LEFT: 

Select the lower left of the Finisher/Stapler unit 

 

LOWER RIGHT: 

Select the lower right of the Finisher/Stapler unit

 

OFF: 

 

Default = UPPER LEFT  

Explanation 

 

This command selects the staple. 

 

This command is ignored when the Finisher/Stapler unit is not available. 

 

The difference between the SET and DEFAULT selection and the effective period of this setting follow the 
PJL specifications. 

 

 

3.1.5.

 

PS staple on/off  

Command 

<</BRStaple #>>

setpagedevice 

Parameter 

 

0: 

Select off of the Finisher/Stapler unit. 

 

1: 

Select the upper left of the Finisher/Stapler unit. 

 

2: 

Select the upper right of the Finisher/Stapler unit. 

 

3: 

Select the lower left of the Finisher/Stapler unit. 

 

4: 

Select the upper right of the Finisher/Stapler unit. 

Default = 0 

Explanation 

 

This command selects the staple.  

 

This command is ignored when the Finisher/Stapler unit is not available.  
<Example> 

<</BRStaple 0>>

setpagedevice 

 
 

Detailed Information for Brother HL-7050N Command Reference Guide for Software Developers

Lists of information found in Brother HL-7050N Command Reference Guide for Software Developers - Page 549

  • 3.1.
  • 4. PJL staple on/off Format @PJL SET/DEFAULT STAPLE= StapleName Parameter StapleName*  UPPER LEFT: Select the upper left of the Finisher/Stapler unit  UPPER RIGHT: Select the upper right of the Finisher/Stapler unit  LOWER LEFT: Select the lower left of the Finisher/Stapler unit  LOWER RIGHT: Select the lower right of the Finisher/Stapler unit  OFF: Default = UPPER LEFT Explanation  This command selects the staple.
  • 3.1.
  • 5. PS staple on/off Command &lt;&lt;/BRStaple #&gt;&gt; setpagedevice Parameter #  0: Select off of the Finisher/Stapler unit.

Related Documents for Brother HL-7050N Command Reference Guide for Software Developers