Bobbin Work Free-Motion Sewing; Print the desired template.; Affix the stabilizer to the wrong side of the - Page 12

11

Bobbin Work Free-Motion Sewing

If so desired, use a template or draw your design on the 
stabilizer to allow for ease of stitching. Remember, your 
stitches with your decorative thread will be on the 
underneath side of your fabric and the stabilizer will be 
on the top of the wrong side of your fabric.

The CD-ROM included with this kit contains template 
data for free-motion sewing. For a list of the template 
designs, refer to “Templates for Free-Motion Sewing” 
on page 12.

a

Print the desired template.

b

Affix the stabilizer to the wrong side of the 
fabric.

c

Place commercially available transfer paper 
on the stabilizer, then the paper printed with 
the template on top, and then trace the design 
with a pencil.

a

Template

b

Transfer paper

c

Stabilizer on wrong side of fabric

d

Once the design is transferred to the stabilizer, 
position the fabric under the free-motion 
presser foot on the machine, and then use free-
motion sewing to sew the design.

Note

• For bobbin work free motion sewing use the 

instructions for “CREATING BOBBIN WORK” 
beginning on page 8.

• Use the quilting foot provided with your machine. If 

you do not have a quilting foot, contact your nearest 
authorized dealer to purchase. For details on using 
the quilting foot, refer to the Operation Manual 
provided with your machine or with the presser foot.

Note

• Print the template in its original dimensions. If an 

enlarged template is used, the bobbin thread may 
run out during sewing.

Note

• Some templates have the arrows to show you the 

sewing direction. Trace the arrows with design.