Install the needle plate cover and bobbin ; cover with tabs.; Install the flat bed attachment.- Page 8

7

p

Install the needle plate cover and bobbin 
cover with tabs.

For details on installing the needle plate cover, 
refer to the machine’s Operation Manual.

a

Needle plate cover

b

Bobbin cover with tabs

q

Install the flat bed attachment.

→

This completes the upper and lower threading.

Note

• Two bobbin covers may be included, depending on 

the country or region where this kit was purchased. 
Use the bobbin cover with the same shape as the 
bobbin cover included with your machine. The 
bobbin cover with a shape different than that 
included with your machine cannot be installed on 
the machine.

 CAUTION

• When creating bobbin work, use the bobbin cover 

with tabs, otherwise the thread may become 
tangled or the needle may break.

Note

• When installing the needle plate cover, do not allow 

it to pinch the thread.

Note

• When installing the flat bed attachment, do not allow 

it to pinch the thread.

• When the bobbin thread is replaced with a new one, 

be sure to repeat the procedure from 

a

 on 

“Preparing the Bobbin Thread”, otherwise the lower 
threading will not be done correctly.