3 Connecting the power cord and telephone line; Improper Setup; Setting Up the Machine- Page 8

Setting Up the Machine

6

STEP 1

8

While holding the paper tray in place, pull out 
the paper support ( ) until it clicks, and then 
unfold the paper support flap ( ).

Note

Do not use the paper support flap ( ) for Legal 
size paper.

 3

Connecting the power cord 

and telephone line

1

Connect the power cord.

2

Connect the telephone line cord. Connect one 
end of the telephone line cord to the jack on the 
machine marked 

LINE

 and the other end to a 

modular wall jack.

Improper Setup

DO NOT connect the USB cable. Connecting 
the USB cable is done during the software 
installation process.

Note

If you are sharing one telephone line with an 
external telephone, connect it as shown below.

1 Extension telephone

2 External telephone 

Note

If you are sharing one telephone line with an 
external telephone answering machine, connect it 
as shown below.

Set the receive mode to ‘

External TAD

’ if 

you have an external answering machine. 
For details, see Connecting an external TAD 
(telephone answering device) in Chapter 7 of 
the User’s Guide.

1

2