3 Installing the phone line and power cord; Improper Setup; Setting Up the Machine- Page 7

Setting Up the Machine

5

4

Fan the stack of paper well to avoid paper jams 
and misfeeds.

5

Gently put the paper into the paper tray print 
side down and top edge first.
Check that the paper is flat in the tray and 
below the maximum paper mark (1).

Note

• Make sure the paper side guides touch the sides 

of the paper.

• Be careful that you do not push the paper in too 

far; it may lift at the back of the tray and cause 
paper feed problems.

6

Put the output paper tray back on and push the 
paper tray firmly back into the machine.

 3

Installing the phone line and 

power cord

1

Connect the power cord.

2

Connect the telephone line cord. Connect one 
end of the telephone line cord to the jack on the 
machine marked 

LINE

 and the other end to a 

modular wall jack.

Improper Setup

DO NOT connect the USB cable. Connecting 
the USB cable is done during the software 
installation process.

Note

If you are sharing one phone line with an external 
telephone, connect it as shown below.

1 Extension telephone
2 External telephone

1

1

2