3 Connecting the power cord and telephone line; Improper Setup; Setting Up the Machine- Page 9

Setting Up the Machine

7

8

While holding the paper tray in place, pull out 
the paper support

 until it clicks, and then 

unfold the paper support flap

.

Note

Do not use the paper support flap   for Legal size 
paper.

Note

• You can use the photo bypass tray which is 

located on the top of the paper tray to print on 
photo 4 x 6 in. (10 x 15 cm) and photo L size 
paper.

• For details, see Loading photo paper in Chapter 2 

of the User’s Guide.

 3

Connecting the power cord 

and telephone line

1

Connect the power cord.

2

Connect the telephone line cord. Connect one 
end of the telephone line cord to the jack on the 
machine marked 

LINE

 and the other end to a 

modular wall jack.

Improper Setup

DO NOT connect the interface cable. 
Connecting the interface cable is done during 
the software installation process.

Note

If you are sharing one telephone line with an 
external telephone, connect it as shown below.

1 Extension telephone
2 External telephone

1

2