Replacing periodic maintenance parts; Packing and shipping the machine; Replacing periodic - Page 151

Troubleshooting and routine maintenance

137

Replacing periodic 

maintenance parts

C

The periodic maintenance parts will need to 
be replaced regularly to maintain the print 
quality. The parts listed below will have to be 
replaced after printing approximately 100,000 
pages. Please call Brother Customer Service 
when the following messages appear on the 
LCD.

Packing and shipping 

the machine

C

When you transport the machine, use the 
packing materials that came with your 
machine. If you do not pack the machine 
properly, you could void your warranty. The 
machine should be adequately insured with 
the carrier.

a

Turn off the machine’s power switch.

b

Unplug the machine from the telephone 
wall jack.

c

Unplug all the cables and AC power 
cord from the machine.

d

Push the Scanner Lock Lever down to 
lock the scanner. This lever is located on 
the left of the scanner glass.

CAUTION

Damage caused to your machine by failure 
to lock the scanner before packing and 
shipping may void your warranty.

e

Open the front cover.

f

Take out the drum unit and toner 
cartridge assembly. Leave the toner 
cartridge installed in the drum unit.

g

Put the drum unit and toner cartridge 
assembly into the plastic bag and seal 
the bag.

h

Close the front cover.

i

Wrap the machine in the plastic bag and 
put it in the original carton with the 
original packing material.

LCD message

Description

Replace PF 
KitMP

Replace paper feeding kit for 
MP tray.

Replace PF 
Kit1

Replace paper feeding kit for 
Tray 1.

Replace PF 
Kit2

Replace paper feeding kit for 
Tray 2.

Replace Fuser

Replace fuser unit.

Replace Laser

Replace laser unit.