Select the connecting position for the second ; pattern, and then press ; example, select the center point of the left - Page 17

16

j

Select the connecting position for the second 
pattern, and then press 

. In this 

example, select the center point of the left 
edge.

a

Reference edge and reference point

b

Second pattern [2]

c

First pattern [1]

→

Message appears on screen and carriage will move 

after pressing 

.

k

Prepare two embroidery positioning stickers. 
We will follow the on-screen instructions to 
affix these two stickers to the fabric so that 
the positioning marks can be detected by the 
camera.

l

Affix the first embroidery positioning sticker 
onto the fabric within the red lines by using 
both hands to press down on each corner of 
the sticker. Affix the sticker with the large 
circle to the top as shown on machine. Then, 
press .

→

The camera detects the first positioning sticker.

Note

• Using 

 and 

 in this screen, the position of the 

second pattern can be changed. For details, refer to 
“Sliding the Position of the Pattern to be Connected” 
on page 27.

c

a

b

Note

• Use the positioning stickers included with this 

product or purchase replacement stickers (SAEPS2, 
EPS2: XF0763-001) from your Brother dealer. If any 
other sticker is used, the camera may not recognize 
it.

• The 182 mm × 257 mm (7 inches × 10 inches) 

embroidery positioning sticker sheet with strong 
adhesive is most appropriate for connecting patterns 
(SAEPS2, EPS2: XF0763-001). If any other 
positioning sticker is used, it may peel off. If the 
sticker peels off, the patterns cannot be connected.