Using both hands affix the second embroidery ; positioning mark within the red lines by ; pressing down on each corner of the - Page 18

Brother PR 1000 Operation Manual for Premium Pack I (Optional accessories)

background image

17

m

Using both hands affix the second embroidery 

positioning mark within the red lines by 

pressing down on each corner of the 

positioning mark onto the material and then 

touch .

The camera detects the second positioning sticker.

Note

• Use new positioning stickers. If a sticker is reused, it 

may easily peel off. If the sticker peels off during this 
procedure, the patterns cannot be connected. Start 
the project again with new fabric and stabilizer.

• Using fingers apply pressure to the corners of the 

positioning sticker to firmly affix it to the fabric. If the 
sticker is not firmly attached, the camera may 
incorrectly detect the sticker.

• If any of the following messages appear, reattach 

the positioning sticker in the correct position. Make 
sure that the sticker is affixed with the large circle at 
the top.

Detailed Information for Brother PR 1000 Operation Manual for Premium Pack I (Optional accessories)

Lists of information found in Brother PR 1000 Operation Manual for Premium Pack I (Optional accessories) - Page 18

  • Use new positioning stickers.
  • Using fingers apply pressure to the corners of the positioning sticker to firmly affix it to the fabric.
  • If any of the following messages appear, reattach the positioning sticker in the correct position.

Related Documents for Brother PR 1000 Operation Manual for Premium Pack I (Optional accessories)