Feed & Cut; To feed and cut off 1” (24 mm) of tape:; To use the Numbering function:- Page 48

40

The 

Feed & Cut

 function is used to feed out 1” (24 mm) of tape and automatically cut it off.

For example, after printing with the 

Auto cut

 function set to 

OFF

 or when printing has been

interrupted.

To feed and cut off 1” (24 mm) of tape:

●

Hold down 

c

 and press 

_

 once. 1” (24 mm) of tape is fed out and cut off.

☞

Please use scissors to cut off Fabric Tapes or Strong Adhesive Tapes.

This function can be used to print many copies of the same text while increasing a certain
number in the text by 1 after each label is printed.

To use the Numbering function:

1

Press 

f

, 

w

, 

h

 or 

e

 to position the cursor below the number that you wish to

increase.

2

Hold down 

c

 and press 

O

. The message “NUMBER UNTIL” appears in the display

with the current setting.

☞

To cancel the 

Numbering

 function at any time, hold down 

c

 and press 

O

 (or

press just 

*

 ).

3

Use the number keys to type in the last number to be printed.

☞

The last number to be printed can also be selected by pressing 

h

 or 

e

.

A number lower than the one that was selected cannot be entered.

4

Press 

p

 (or 

r

) to begin printing the labels. The number of each copy is displayed

while it is being printed.

☞

If the 

Tape margin

 function is set to any setting other than 

NONE

, a cutting guide (:)

is printed between each label so the tape can be cut to the correct size.

FEED & CUT FUNCTION

NUMBERING FUNCTION