Towing Equipment; Hitch Cover; Driving and Operating- Page 243

2020 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

13527524) - 2020 - CRC - 9/5/19

242

Driving and Operating

The trailer tongue weight (1) should
be 10

15% of the loaded trailer

weight (2). Some specific trailer
types, such as boat trailers, fall
outside of this range. Always refer
to the trailer owner

s manual for the

recommended trailer tongue weight
for each trailer. Never exceed the
maximum loads for your vehicle,
hitch and trailer.

After loading the trailer, separately
weigh the trailer and then the
tongue to see if the weights are
proper. If the trailer tongue weight is
too high or too low, adjustments
might be made by moving some
items around in the trailer.

If a cargo carrier is used in the
trailer hitch receiver, choose a
carrier that positions the load as
close to the vehicle as possible.
Make sure the total weight,
including the carrier, is no more than
half of the maximum allowable
tongue weight for the vehicle or
227 kg (500 lb), whichever is less.

Ask your dealer for trailering
information or assistance.

Towing Equipment

Hitches

Always use the correct hitch
equipment for your vehicle.
Crosswinds, large trucks going by,
and rough roads can affect the
trailer and the hitch.

Never attach rental hitches or other
bumper-type hitches. Only use
frame-mounted hitches that do not
attach to the bumper.

Hitch Cover

To remove hitch cover, if equipped:

1. Remove the two fasteners on

the lower tabs.

2. Pull the lower edge of the

cover to about a 45 degree
angle.

3. Pull the cover downward to

disengage the upper
attachments.

To reinstall hitch cover:

1. Hold cover at a 45 degree

angle to the vehicle and push
the upper tabs into the slots in
the bumper.

2. Push the bottom of the cover

forward until the lower tabs line
up with the lower slots.

3. Snap the hitch cover into place

by pushing the upper corners
forward.

4. Reinstall the two fasteners on

the lower tabs.

Consider using mechanical sway
controls with any trailer. Ask a
trailering professional about sway
controls or refer to the trailer
manufacturer's recommendations
and instructions.

Detailed Information for 2020 Buick enclave Owner Manual

Lists of information found in 2020 Buick enclave Owner Manual - Page 243

  • 1. Remove the two fasteners on the lower tabs.
  • 2. Pull the lower edge of the cover to about a 45 degree angle.
  • 3. Pull the cover downward to disengage the upper attachments.
  • 1. Hold cover at a 45 degree angle to the vehicle and push the upper tabs into the slots in the bumper.
  • 2. Push the bottom of the cover forward until the lower tabs line up with the lower slots.
  • 3. Snap the hitch cover into place by pushing the upper corners forward.
  • 4. Reinstall the two fasteners on the lower tabs.