Power Door Locks; Delayed Locking; Keys, Doors, and Windows- Page 20

2020 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

13527524) - 2020 - CRC - 9/5/19

Keys, Doors, and Windows

19

4. Insert the key into the cylinder

and turn to unlock.

To replace the cap:

1. Pull the door handle to the

open position and hold it open
until cap installation is
complete.

2. Position the bottom edge of the

cap under the lower edge of
the metal piece (2). The
tabs (3) attach to the metal
piece (2) at the positions (1).

3. Rotate the cap upward and

install into place.

4. Check that the cap is secure.

Free-Turning Locks

The door key lock cylinder turns
freely when either the wrong key is
used, or the correct key is not fully
inserted. The free-turning door lock
feature prevents the lock from being
forced open. To reset the lock, turn
it to the vertical position with the
correct key fully inserted. Remove
the key and insert it again. If this
does not reset the lock, turn the key
halfway around in the cylinder and
repeat the reset procedure.

Power Door Locks

Q

:

Press to lock the doors.

K

:

Press to unlock the doors.

Delayed Locking

This feature delays the locking of
the doors until five seconds after all
doors are closed.

Delayed locking can only be turned
on when the Open Door
Anti-Lockout feature has been
turned off.

Detailed Information for 2020 Buick enclave Owner Manual

Lists of information found in 2020 Buick enclave Owner Manual - Page 20

  • 4. Insert the key into the cylinder and turn to unlock.
  • 1. Pull the door handle to the open position and hold it open until cap installation is complete.
  • 2. Position the bottom edge of the cap under the lower edge of the metal piece (2).
  • 3. Rotate the cap upward and install into place.
  • 4. Check that the cap is secure.