Automatic Operation; AUTO (Automatic Fan):; AUTO (Automatic Mode)- Page 183

2010 Buick Lucerne Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraint System
Features and Controls
Instrument Panel
Service and Appearance Care
background image

Automatic Operation

AUTO (Automatic Fan):

When AUTO is selected on

the fan control, the system automatically adjusts the fan
speed. If the OnStar

®

system is activated when this

position is selected, the fan speed will lower.

AUTO (Automatic Mode)

1. Turn the fan control to AUTO.

2. Turn the mode control to AUTO.

3. Adjust the temperature to a comfortable setting

between 68°F (21°C) and 78°F (26°C).

Choosing the coldest or warmest temperature
setting will not cause the system to heat or cool
any faster. In cold weather, the system starts at
reduced fan speeds to avoid blowing cold air into
the vehicle until warmer air is available. The
system will start out blowing air to the floor, but
may change modes automatically as the vehicle
warms up to maintain the chosen temperature
setting. The length of time needed to warm the
interior depends on the outside temperature.

4. Wait a few minutes for the system to automatically

regulate. Then adjust the temperature as
necessary to find your comfort setting.

Do not cover the solar sensor located in the center of
the instrument panel, near the windshield. For more
information on the solar sensor, see

Sensors

later in

this section.

After the vehicle is started, the display shows the
interior temperature settings.

When the ENG/MET (English/metric) button on the
Driver Information Center (DIC) is pressed, the display
shows readings in Fahrenheit or Celsius. Use the
ENG/MET button to toggle between the readings.

AUTO (Automatic Air Conditioning):

If AUTO is

selected on the fan or mode control, the system
automatically controls the air conditioning compressor.
The A/C compressor runs automatically even at cool
outside temperatures in order to dehumidify the air. The
A/C indicator light is lit when the system is operating
automatically. Press the A/C button on the fan control to
turn off the A/C. To clear windows better in defog or
defrost modes, the A/C compressor runs automatically
in damp cool conditions.

4-23

Detailed Information for 2010 Buick Lucerne Owner Manual

Lists of information found in 2010 Buick Lucerne Owner Manual - Page 183

  • 1. Turn the fan control to AUTO.
  • 2. Turn the mode control to AUTO.
  • 3. Adjust the temperature to a comfortable setting between 68°F (21°C) and 78°F (26°C).
  • 4. Wait a few minutes for the system to automatically regulate.

Related Documents for 2010 Buick Lucerne Owner Manual