If the air cleaner/filter is off, dirt can easily; get into the engine, which could damage it. Always; have the air cleaner/filter in place when you are- Page 324

2010 Buick Lucerne Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraint System
Features and Controls
Instrument Panel
Service and Appearance Care
background image

To inspect or replace the filter:

1. Remove the two screws on the top of the engine

air cleaner/filter cover.

2. Lift up the outboard side of the cover at an angle

while pulling toward you. This is necessary due to
the two hinges located on the inboard side of the
cover.

3. Remove the engine air cleaner/filter and any loose

debris that may be found in the air cleaner base.

4. Inspect or replace the air filter element.

To reinstall the cover:

1. Align the two hinges located on the inboard side of

the cover.

2. Push the cover slightly down and towards the

engine to engage the tabs in the hinges and align
the two screws.

3. Tighten the two screws on the top of the engine air

cleaner/filter cover.

{

WARNING:

Operating the engine with the air cleaner/filter off
can cause you or others to be burned. The air
cleaner not only cleans the air; it helps to stop
flames if the engine backfires. Use caution when
working on the engine and do not drive with the
air cleaner/filter off.

Notice:

If the air cleaner/filter is off, dirt can easily

get into the engine, which could damage it. Always
have the air cleaner/filter in place when you are
driving.

6-22

Detailed Information for 2010 Buick Lucerne Owner Manual

Lists of information found in 2010 Buick Lucerne Owner Manual - Page 324

  • 1. Remove the two screws on the top of the engine air cleaner/filter cover.
  • 2. Lift up the outboard side of the cover at an angle while pulling toward you.
  • 3. Remove the engine air cleaner/filter and any loose debris that may be found in the air cleaner base.
  • 4. Inspect or replace the air filter element.
  • 1. Align the two hinges located on the inboard side of the cover.
  • 2. Push the cover slightly down and towards the engine to engage the tabs in the hinges and align the two screws.
  • 3. Tighten the two screws on the top of the engine air cleaner/filter cover.

Related Documents for 2010 Buick Lucerne Owner Manual