Perimeter Lighting- Page 105

yellow

blue     

2-47

Perimeter Lighting

When the UNLOCK button on the remote keyless entry
transmitter is pressed, the daytime running lamps (high
beams at reduced intensity), parking lamps and back

-

up

lamps will come on if it is dark enough outside
according to the twilight sentinel.

This feature will only be activated when the security
feedback feature is programmed to be in Modes 1, 3 or 5
on the transmitter. Modes 0, 2 and 4 do not respond with
exterior lights flashing when unlocking the vehicle so
perimeter lighting will not be active.

This feature can be programmed on or off for 
each transmitter.

To turn the feature off:

1. Press and hold LOCK on the door lock switch on the

door throughout this procedure. All doors will lock.

2. Press the instant alarm button on the transmitter to enter 

the programming mode. Perimeter lighting remains on at 
this time and the horn will chirp two times.

3. Press the instant alarm button on the key transmitter

again. Perimeter lighting is disabled and the horn
will chirp one time.

4. Release the door lock switch. The perimeter lighting

feature is now off.

To turn the feature on:

1. Press and hold LOCK on the door lock switch on the

door throughout this procedure. All doors will lock.

2. Press the instant alarm button on the key transmitter

to enter the programming mode. Perimeter lighting
remains off at this time and the horn will chirp 
one time.

3. Press the instant alarm button on the transmitter

again. Perimeter lighting is now enabled and the
horn will chirp two times.

4. Release the door lock switch. The perimeter lighting

feature is now on.

Perimeter lighting can also be activated through the
optional Driver Information Center (DIC). See
“Personal Choice Features” or “Driver Information
Center” in the Index.