Customizing Your Memory Door Locks Feature; Mode 0:; Mode 1:- Page 64

yellow

blue     

2-6

Customizing Your Memory Door Locks Feature

You can program the memory door locks feature to one
of the following modes:

Mode 0: No automatic door lock or unlock.

Mode 1: All doors automatically lock when shifted out
of PARK (P). No automatic door unlock.

Mode 2: All doors automatically lock when shifted out
of PARK (P). Only the driver’s door automatically
unlocks when shifted into PARK (P).

Mode 3: All doors automatically lock when shifted out
of PARK (P). All doors automatically unlock when
shifted into PARK (P).

Vehicles are delivered programmed in Mode 3; 
however, each remote keyless entry transmitter can 
be programmed to a different mode according to the
user’s preference.

To change modes:

1. Close all the doors and turn the ignition on. Keep all

doors closed throughout this procedure.

2. Press and hold LOCK on the power door lock switch

on the driver’s door through Step 4.

3. Press the LOCK button on the remote keyless 

entry transmitter to enter the programming mode.
The memory door lock mode will remain in the
current mode.

4. Press the LOCK button on the transmitter again.

Each time the transmitter’s LOCK button is pressed,
the mode will advance by one, going from Mode 3 to
Mode 0 to Mode 1, etc.

For each press of the LOCK button, the door locks
will activate in the same manner they would activate
in the corresponding memory door lock mode. For
example, pressing the LOCK button on the
transmitter to advance to Mode 2 would result in all
doors locking and then, only the driver’s door would
unlock. For Mode 0, no locking or unlocking 
will occur.

5. Release the power door lock switch and turn the

ignition off. The automatic door locks will remain in
the most recent mode selected.