Front Turn Signal- Page 297

yellow

blue     

6-39

2. Turn the vertical aiming screw (C) until the level

bubble (D) is lined up with zero.

Front Turn Signal

The front turn signal bulbs can be accessed by removing
the headlamp assembly as described in the previous bulb
replacement procedure.

Once the headlamp
assembly has been removed,
reach down from the top of
the vehicle and, while
pressing the lock tab on the
socket, turn the socket
one

-

quarter of a turn and

pull it out.

Remove the old bulb by pulling it straight out of the
socket. Replace the bulb and turn the bulb assembly
back into place.