Tail/Stop/Turn Signal Lamp- Page 281

yellow

blue     

6-41

Tail/Stop/Turn Signal Lamp

1. Remove the three plastic wing nuts (A). (Pliers may

be required to remove the wing nuts.)

2. Pull the taillamp housing (B) away from the body 

of the vehicle.

3. Squeeze the tab on the socket and turn the 

socket counterclockwise.

4. Pull out the socket.

5. Pull the bulb out of the socket. (There are two bulbs

on each taillamp.)

6. Push in a new bulb.

7. Replace the socket into the housing and 

turn clockwise.

8. Replace the taillamp housing to the body of 

the vehicle.

9. Install and tighten the three plastic wing nuts.