Rust or dirt on a wheel, or on the parts to which; it is fastened, can make wheel nuts become loose; after a time. The wheel could come off and cause- Page 302

6-48

When rotating your tires, always use the correct rotation
pattern shown here.

Don’t include the compact spare tire in your 
tire rotation.

After the tires have been rotated, adjust the front and
rear inflation pressures as shown on the Tire

-

Loading

Information label. Reset the Tire Inflation Monitor
system. See “Tire Inflation Monitor System” in the
Index. Make certain that all wheel nuts are properly
tightened. See “Wheel Nut Torque” in the Index.

CAUTION:

Rust or dirt on a wheel, or on the parts to which
it is fastened, can make wheel nuts become loose
after a time. The wheel could come off and cause
an accident. When you change a wheel, remove
any rust or dirt from places where the wheel
attaches to the vehicle. In an emergency, you 
can use a cloth or a paper towel to do this; 
but be sure to use a scraper or wire brush later, 
if you need to, to get all the rust or dirt off. 
See “Changing a Flat Tire” in the Index.