Programmable Modes; Mode 1:; Mode 2:- Page 76

2002 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Section 1 Seats and Restraint Systems
Section 2 Features and Controls
Section 3 Comfort Controls and Audio Systems
Section 4 Your Driving and the Road
Section 6 Service and Appearance Care
Section 7 Maintenance Schedule
Section 8 Customer Assistance Information
background image

2-12

Programmable Modes

Your vehicle can be programmed to one of the 
following modes.

Mode 1: No Verification

Mode 2: Horn Chirp only

Mode 3: Headlamp Flash only

Mode 4: Horn Chirp and Headlamp Flash

Before your vehicle was shipped from the factory, it 
was programmed to Mode 3. The mode to which your
vehicle was programmed may have been changed since
it left the factory. To determine which security feedback
lock mode your vehicle is programmed to or to program
your vehicle to a different mode, do the following:

1. Close all doors and turn the ignition key to RUN.

2. Press and hold the power door lock switch in the

lock position.

3. While holding the door lock switch in the lock

position, press and release the remote keyless 
entry transmitter LOCK button. This will start the
customization mode. While in the customization
mode, the feature will sound the number of chimes
corresponding to the current lock mode. (If you 
do not wish to change the current mode, you can
either exit the programming mode by following the
instructions listed here or program the next feature
available on your vehicle.)

4. Each additional press of the remote keyless entry

transmitter LOCK button will cause your vehicle to
advance the lock mode by one, starting from the
current lock mode.

5. If cycled beyond Mode 4, the vehicle will enter

Mode 1. When the door lock switch is released, 
the vehicle will remain in the most recent lock mode.

Detailed Information for 2002 Buick Regal Owner Manual

Lists of information found in 2002 Buick Regal Owner Manual - Page 76

  • 3. The mode to which your vehicle was programmed may have been changed since it left the factory.
  • 1. Close all doors and turn the ignition key to RUN.
  • 2. Press and hold the power door lock switch in the lock position.
  • 3. While holding the door lock switch in the lock position, press and release the remote keyless entry transmitter LOCK button.
  • 4. Each additional press of the remote keyless entry transmitter LOCK button will cause your vehicle to advance the lock mode by one, starting from the current lock mode.
  • 5. If cycled beyond Mode 4, the vehicle will enter Mode 1.