Manual Transmission Operation; Manual Transmission Shift Pattern; Manual Transmission- Page 176

Manual Transmission

Shift Pattern

▼

Manual Transmission Shift Pattern

1. Neutral position

The shift pattern of the transmission is
conventional, as shown.
 
Depress the clutch pedal all the way
down while shifting; then release it
slowly.
 
Your vehicle is equipped with a device
to prevent shifting to R (reverse) by
mistake. Push the shift lever downward
and shift to R.
 

WARNING

Do not use sudden engine braking on
slippery road surfaces or at high
speeds:

Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed could
cause the tires to skid. This could lead
to loss of vehicle control and an
accident.

Always leave the shift lever in 1 or R
position and set the parking brake
when leaving the vehicle unattended:

Otherwise the vehicle could move and
cause an accident.

CAUTION



Keep your foot off the clutch pedal
except when shifting gears. Also, do
not use the clutch to hold the vehicle
on an upgrade. Riding the clutch will
cause needless clutch wear and
damage.



Do not apply any excessive lateral
force to the shift lever when
changing from 5th to 4th gear. This
could lead to the accidental
selection of 2nd gear, which could
result in damage to the transmission.



Make sure the vehicle comes to a
complete stop before shifting to R.
Shifting to R while the vehicle is still
moving may damage the
transmission.

When Driving

Manual Transmission Operation

4-30

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09