Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) (Automatic Transmi ...; Mazda Radar Cruise; Indication on display- Page 273

Request

Indication on display

Shift up

Shift Up to a Higher Gear

Shift down

Shift Down to a Lower Gear

NOTE



If the gears are not shifted up even
though the shift-up request
indication is displayed, load will be
applied to the engine and the MRCC
might be automatically canceled or
engine damage could occur.



If the gears are not shifted down
even though the shift-down request
indication is displayed, the MRCC
might be automatically canceled or
engine stalling could occur.

Mazda Radar Cruise

Control with Stop & Go

function (MRCC with

Stop & Go function)

(Automatic

Transmission)

*

▼

Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function)

The MRCC with Stop & Go function
system is designed to maintain
headway control

*1

 with a vehicle

ahead according to your vehicle's
speed using a front radar sensor to
detect the distance to the vehicle
ahead and a preset vehicle speed
without you having to use the
accelerator or brake pedals.

*

1 Headway Control: Control of the

distance between your vehicle and
the vehicle ahead detected by the
Mazda Radar Cruise Control
(MRCC) system.

Additionally, if your vehicle starts
closing in on the vehicle ahead such as
if the vehicle ahead brakes suddenly, a
warning sound and a warning
indication in the display are activated
simultaneously to alert you to maintain
a sufficient distance between the
vehicles.
If the vehicle ahead stops while you are
following behind it, your vehicle will
stop and be held stopped
automatically (stop hold control), and
headway control will resume when you
resume driving the vehicle such as by
pressing the RES switch.
Also refer to the following before using
the MRCC with Stop & Go function.



AUTOHOLD (page 4-69)

When Driving

i-ACTIVSENSE

*Some models.

4-127

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09