Owner Maintenance; Maintenance and Care; License plate lights- Page 464

6–52

Maintenance and Care

Owner Maintenance

Reverse lights

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  Remove the cover.

3.  Disconnect the electrical connector 

from the bulb by pressing the tab on the 

connector with your finger and pulling 

the connector.

4.  Turn the socket and bulb assembly 

counterclockwise and remove it.

5.  Disconnect the bulb from the socket.

6.  Install the new bulb in the reverse order 

of the removal procedure.

License plate lights

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  Wrap a flathead screwdriver with a soft 

cloth to prevent damage to the lens, 

and then remove the lens by carefully 

prying on the edge of the lens with a 

flathead screwdriver.

3.  Disconnect the bulb by pulling it out.

4.  Install the new bulb in the reverse order 

of the removal procedure.

CX-9_8FD6-EA-16B_Edition3.indb   52

2016/03/18   11:51:18