Fig. 4-7; Fig. 4-8- Page 76

CHAPTER 4  DISASSEMBLY AND RE-ASSEMBLY

4-6

(5)  Keeping the paper cassette upside down, release the pressure roller holder assembly

from the cassette by releasing the metal mounting plate from the plastic retaining boss.
Use a flat screwdriver to press the metal plate forwards until it clears the boss and then
remove the pressure roller holder assembly downwards from the cassette.

(6)  Remove the cassette pressure roller from the assembly, then remove the pressure roller

shaft from the pressure roller.

(7)  Remove the sponge holder ASSY from the holder.  The two sponge holder springs will

also come off.

Fig. 4-7

(8)  Keeping the paper cassette upside down, remove the two M2.6x5 Taptite screws.

(9)  Unhook the catches of each side guide, then press the lock lever towards the front of the

cassette to release the pressure plate.

Fig. 4-8

Cassette pressure roller

Pressure roller holder

Paper cassette

Taptite, cup M2.6x5

Taptite, cup M2.6x5

Side guide rack

Pressure roller shaft

(catches)

Sponge holder ASSY

Lock lever

Sponge holder springs

Paper cassette
(Back side)

Pressure roller holder

Flat screwdriver

Step (9)

Side guide L

Side guide rack

Side guide L