Fig. 4-15; Fig. 4-16; Network Board (for HL-1270N only)- Page 80

CHAPTER 4  DISASSEMBLY AND RE-ASSEMBLY

4-10

  3.4

Network Board (for HL-1270N only)

(1)  Open the rear cover.

(2)  Remove the two M3x8 Taptite screws to remove the access cover.

Fig. 4-15

(3)  Remove the two M3x6 Taptite screws securing the network board.

(4)  Disconnect the connector connected with the main PCB and remove the network board.

Fig. 4-16

Network board

Rear cover

Access cover

Taptite, bind M3x8

Taptite, cup M3x6