Top Cover; Fig. 4-19; Fig. 4-20- Page 82

CHAPTER 4  DISASSEMBLY AND RE-ASSEMBLY

4-12

  3.6

Top Cover

(1)  Remove the two M3x10 Taptite screws securing the top cover.

(2)  Release the hooks on either side of the top cover from the bosses on the main cover by

pulling the top cover forwards.

Fig. 4-19

(3)  Open the rear cover, then release the hooks (A) at the right and left hand sides of the top

cover while pushing them towards the side of the printer from the rear.

(4)  Lift up the top cover and release the hooks (B) at the right and left hand sides of the top

cover to remove the top cover.

Fig. 4-20

Taptite, cup M3x10

Taptite, cup M3x10

Top cover

Step (2)

Top cover

(hook (B))

(hook (B))

(hook (A))

Rear cover

Step (3)

Rear cover

(boss)