Remote commands; 6 - 6; Change the Fax Forwarding, - Page 72

Remote Fax Options

6 - 6

6

Remote commands

Follow the commands below to access features when you are away from the machine. When you 
call the machine and enter your Remote Access Code (3 digits followed by 

), the system will 

give two short beeps and you must enter a remote command.

Remote commands

Operation details

95

Change the Fax Forwarding, 
Paging or Fax Storage settings

1

 OFF

You can select 

Off

 after you have retrieved or erased all your 

messages.

2

 Fax Forwarding

If you hear one long beep, the change has been accepted. If 
you hear three short beeps, you cannot change it because 
something has not been set up (for example, perhaps a Fax 
Forwarding or Paging number had not been registered). You 
can register your Fax Forwarding number by entering 4. (See 

Changing your Fax Forwarding number

 on page 6-7.) Once 

you have registered the number, Fax Forwarding will work.

You can select 

Off

 after you have retrieved or erased all your 

messages.

3

 Paging

4

 Fax Forwarding number

6

 Fax Storage

96

Retrieve a fax

2

 Retrieve all faxes

Enter the number of a remote fax machine to receive stored fax 
message(s). (See page 6-7.)

3

 Erase faxes from the memory

If you hear one long beep, fax messages have been erased 
from the memory.

97

Check the receiving status

1

 Fax

You can check whether your machine has received any faxes. 
If yes, you will hear one long beep. If no, you will hear three 
short beeps.

98

Change the Receive Mode

1

 External TAD

If you hear one long beep, your change has been accepted. 

2

 Fax/Tel

3

 Fax Only

90

Exit

Press 

9 0

 to exit Remote Retrieval. Wait for the long beep, then 

replace the handset.