Vertical Black Lines When Sending; Handling Incoming Calls; Transmission Verification Report Prints- Page 106

96

C H A P T E R   T W E L V E

Vertical Black Lines When Sending

Use your machine to make a copy. If the copy shows the same
problem, the scanner area is dirty. Lift the front cover and check the
document path. Clean the scanner’s white pressure bar and the glass
under the tape using isopropyl alcohol and a lint-free cloth.

Handling Incoming Calls

F/T Pseudo-Ring in F/T Mode

The machine knows the incoming call is not a fax so it is signalling
you to answer the telephone call. Pick up the machine’s handset or
answer from an extension phone and press your machine’s Remote
Deactivation Code (default setting is #51).

Transferring a Call to the Machine

If you have answered the machine’s handset, press 

Start

, and hang

up immediately.

If you answered at an extension phone, press your three-digit Remote
Activation Code (the factory setting is  51). When your machine
answers, hang up.

Fax Machine “Hears” Voice as CNG Tone

If your machine is set to Fax Detect ON, and it answers voice calls
by trying to receive a fax, try turning Fax Detect to 

OFF

.

Transmission Verification Report Prints
“RESULT:ERROR”

There is probably temporary noise or static on the phone line. Try
sending the fax again. If the problem continues, call the Telephone
Company to check your phone line.

See

“For F/T
(Fax/Tel)

Mode Only”

chap. 5