Sending an Internet Fax; Manually Entering Text- Page 124

INTERNET FAX (MFC ONLY) 12 - 3

Sending an Internet Fax

Sending an Internet Fax is the same as sending a normal Fax. If you 
have already programmed the addresses of the Internet Fax 
receivers into the MFC as Speed-Dial locations, you can send the 
Internet Fax by loading the document into the MFC, use the Fax 
Resolution key to set the preferred resolution and select a Speed-
Dial number and pressing Start.

If you wish to manually enter the Internet Fax Address load the 
document into the MFC and press 

Shift

 and 

1

 simultaneously to 

change into the “alphabet” dialling mode.

To manually enter the Internet Fax address, see Manually Entering 
Text on this page.

Manually Entering Text

Press 

Shift

 and 

1

 simultaneously to change into the “alphabet” 

dialling mode. 

You can now use the Dial Pad to dial the E-mail address. Refer to the 
following table: Most number keys have three or four letters printed 
above them. The keys for 0, #, * don’t have printed letters because 
they are used for special characters.

This will differ depending on the whether your MFC contains 
Speed-Dial keys or includes Navigator Keys.

Internet Fax specification does not support color resolutions 
and files types.