IP Address; Subnet Mask- Page 94

FRONT PANEL SETUP MENU 10 - 5

IP Address

This field displays the current IP address of the DCP/MFC. If you 
have selected a BOOT Method of STATIC, enter the IP address that 
you wish to assign to the DCP/MFC (check with your network 
manager for the IP address to use). If you have selected a method 
other than STATIC, the DCP/MFC will attempt to determine its IP 
address using the DHCP or BOOTP protocols. The default IP 
address of the Brother network board in your DCP/MFC will probably 
be incompatible with the IP address numbering scheme of your 
network. We recommend that you contact your network manager for 
an IP address for the network the unit will be connected on.

1

(For MFC) Press 

Menu

, 

6

, 

1

, 

2

.

(For DCP) Press 

Menu

, 

4

, 

1

, 

2

.

2

Select 

1

 to change. Enter the IP address.

3

Press 

Set

.

4

Press 

Stop/Exit

.

Subnet Mask

This field displays the current subnet mask used by the DCP/MFC. If 
you are not using DHCP or BOOTP to obtain the subnet mask, enter 
the desired subnet mask. Check with your network manager for the 
subnet mask to use.

1

(For MFC) Press 

Menu

, 

6

, 

1

, 

3

.

(For DCP) Press 

Menu

, 

4

, 

1

, 

3

.

2

Select 

1

 to change. Enter the Subnet Mask address.

3

Press 

Set

.

4

Press 

Stop/Exit

.

When the BOOT METHOD is set to “AUTO”, the DCP/MFC 
cannot receive IP address from a BOOTP server in 
Windows

®

 2000. So please ensure that you use DHCP for 

Windows

®

 2000 server.