10 - 4 FRONT PANEL SETUP MENU- Page 93

Brother DCP-8020 Network User's Guide

2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

10 - 4 FRONT PANEL SETUP MENU

In order to enable BOOTP, simply use an editor to delete the “#” (if 
there is no “#”, then BOOTP is already enabled). Then edit the 
BOOTP configuration file (usually /etc/bootptab) and enter the name, 
network type (1 for Ethernet), Ethernet address and the IP address, 
subnet mask and gateway of the Print / Fax server. Unfortunately, 
the exact format for doing this is not standardized, so you will need 
to refer to your system documentation to determine how to enter this 
information (many UNIX systems also have template examples in 
the bootptab file that you can use for reference). Some examples of 
typical /etc/bootptab entries include:

BRN_310107 1  00:80:77:31:01:07 192.189.207.3

and:

BRN_310107:ht=ethernet:ha=008077310107:\
ip=192.189.207.3:

Certain BOOTP host software implementations will not respond to 
BOOTP requests if you have not included a download filename in the 
configuration file; if this is the case, simply create a null file on the 
host and specify the name of this file and its path in the configuration 
file.

As with rarp, the Print / Fax server will load its IP address from the 
BOOTP server when the machine is powered on.

DHCP mode

Dynamic Host Configuration Protocol (DHCP) is one of several 
automated mechanisms for IP address allocation. If you have DHCP 
Server in your network (typically a Unix, Windows

®

 2000/XP, 

Windows NT

®

4.0 or Novell Netware network) the Print / Fax server 

will automatically obtains its IP address from DHCP server and 
register its name with any RFC 1001 and 1002-compliant dynamic 
name services.

If you do not want your Print / Fax server configured via 
DHCP, BOOTP or RARP, you must set the BOOT METHOD 
to static, this will prevent the Print / Fax server from trying to 
obtain an IP address from any of these systems. To change 
the BOOT METHOD, use the front panel, Web browser or by 
using the BRAdmin application.

Detailed Information for Brother DCP-8020 Network User's Guide

Lists of information found in Brother DCP-8020 Network User's Guide - Page 93

  • 92.189.
  • 7.3 and: BRN_310107:ht=ethernet:ha=008077310107:\ ip=192.
  • 89.207.
  • 4.0 or Novell Netware network) the Print / Fax server will automatically obtains its IP address from DHCP server and register its name with any RFC 1001 and 1002-compliant dynamic name services.

Related Documents for Brother DCP-8020 Network User's Guide