7-2-3. Checking Print Quality with Nozzle Check Pattern; 7-2-3. Checking Print Quality with Nozzle Check Pattern - Page 90

7. Troubleshooting 

GT-541 

80 

7-2-3. Checking Print Quality with Nozzle Check Pattern 

You can identify which Print Head has the problem by using    the Nozzle Check Pattern. 

(1)  Install the Platen 14 x 16 (see “4-4. Uninstalling / Installing the Platen”). 
(2)  Set the Platen height to the “A” position (see “4-5. Placing the T-shirt on the Platen”). 
(3)  Place a sheet of paper (A4 or letter size) at the right corner of the Platen as shown below. You can 

use a T-shirt instead of paper (see “4-5. Placing the T-shirt on the Platen”). 

Paper 

(4)  Press the OK Button to open the Menu Display. 
(5)  Press the Up/Down Button to select “Test Print”, and then press the OK Button. 
(6)  Press the Up/Down Button to select “Nozzle Check”, and then press the OK Button. 

The following message appears. 

(7)  Press the OK Button to start printing the Nozzle Check Pattern.