List of Factory Settings; List of Factory Settings - Page 99

CHAPTER 3 CONTROL PANEL 

3-31 

! 

List of Factory Settings 

The following table shows the initial factory default settings.  

✒

✒

✒

✒

  Note 

•

The settings are subject to the emulation mode. Effective modes are 
indicated in parentheses in the following table.  

•

The following settings cannot be restored to the factory settings with the 
RESET menu in the “FACTORY SETTINGS” mode: INTERFACE MODE, 
HRC SETTING, PAGE PROTECTION, SCALABLE FONT, LOCK 
PANEL, PAGE COUNTER and local language for display messages. 

•

The COPY setting is always restored to the factory setting when the 
printer is turned off and on again.  

•

It is not possible to reset the NETWORK settings from the Control panel. 
If you wish to reset the print server back to its default factory settings 
(resetting all information such as the password and IP address 
information) hold down the Network Test Button of the Network board 
(NC-4100h) for more than 5 seconds.