Authentication Method; Open System; Encryption Mode- Page 72

Wireless configuration for Macintosh

®

 using the Brother installer application (For HL-2170W)

65

5

Note

• If you want to setup more than WEP key1, click 

Advanced

.

• If you do not know the Authentication or Encryption settings for your network, contact your network 

administrator.

• If the 

Authentication Method

 is set to 

Open System

 and the 

Encryption Mode

 is set to 

WEP

, an error 

indication will NOT appear if the 

Network key

 is incorrect.

o

Click 

Next

. The settings will be sent to your printer. The settings will remain unchanged if you click 

Cancel

.

Note

If you want to manually enter the IP address settings of your printer, click 

Change IP Address 

and enter 

the necessary IP address settings for your network.

p

To communicate with the configured wireless device, you must configure your computer to use the same 
wireless settings. Manually change the wireless settings on your computer to match the printer’s wireless 
settings shown on this screen. Check the box after these settings, and then click 

Next

 or 

Finish

.

(The settings shown on this screen are for example only. Your settings will not be the same.)

You have completed the wireless setup. If you chose to install the printer driver in step 

e

, Go 

to 

Installing the printer driver

 on page 66.