Troubleshooting; Overview; Installation problems- Page 118

11 - 1 TROUBLESHOOTING

11

YL4US_FAX2800MFC4800-FM5.5

11

Troubleshooting

Overview

This chapter describes procedures for troubleshooting problems you 
may encounter with a Brother print server, it is divided into the 
following sections: 

1

Installation Problems

2

Intermittent Problems 

3

Protocol-Specific Troubleshooting

Installation problems

If you cannot print over the network, check the following:

1

Make sure that the printer is powered on, is on-line and ready to 
print.

Verify that the printer and the configuration are good by printing 
the printer settings page. Refer to the Quick Setup Guide. If the 
test fails, check:

a

If the LED is not blinking after connected to the network, then 
the network firmware settings may be corrupted. Please refer 
to Step 3.

b

In this event, try to restore the factory default settings of the 
print server. To learn how to reset the print server, see 
Chapter 3 "Network factory default setting" on page 3-11 of 
the User's Guide. Once you have done that, switch the printer 
off and then on again, and try to print out the configuration 
page.