Windows NT® 4.0 / Windows® 2000/XP; LAN Server/OS/2 Warp Server Configuration; Server Configuration:- Page 51

4 - 8 NETBIOS PEER TO PEER PRINTING

YL4US_FAX2800MFC4800-FM5.5

Windows NT

®

 4.0 / Windows

®

 2000/XP

  2

Click on the Port/s tab and push the Add Port button. In the 
Add Port dialog, highlight Brother NetBIOS port. Click New 
Port and enter the port name. The default port name is BNT1. If 
you have already used this name, you will get an error message 
if you try to use it again, in which case use BNT2, etc... Once 
you have specified the port name, click the OK button. You will 
then see the Port Properties Dialog. Enter the print server and 
port name of the printer that you wish to print to and click OK. 
You should now see the port that you have just created in the 
Print to the following port setting of the printer driver.

LAN Server/OS/2 Warp Server Configuration

As Brother print servers support the SMB protocol over TCP/IP via a 
NetBIOS interface, you can easily configure your printer to work with 
an IBM LAN Server and OS/2 Warp Server networks that have IBM 
TCP/IP V2.0 or later installed on the fileserver. Use the following 
procedure to configure the LAN Server, OS/2 Warp Server or OS/2 
Warp connect workstation.

Server Configuration:

1

Open the Templates folder on the OS/2 desktop.

2

Using the right mouse button, drag the Printer template onto the 
desktop.

3

Type in any desired name for the printer from the Create a 
Printer window.

4

Choose an unused port (for example, LPT3) to connect to the 
printer.

5

Choose the appropriate printer driver from the list.

6

Click Create and then OK.

7

If desired, indicate whether you want to share the printer.