Positioning the printer; Power supply; Environment- Page 21

1 - 4   ABOUT THIS PRINTER

Positioning the printer

Please read the following before you use the printer. 

Power supply

Use the printer within the recommended power range.

Power source:

USA and Canada:

AC 110 to 120 V, 50/60 Hz

Europe and Australia: AC 220 to 240 V, 50/60 Hz

The power cord, including extensions, should be no longer than 5 metres (16½ feet). 

Do not share the same power circuit with other high-power appliances, such as an air conditioner, copier, 
shredder and so on. If you cannot avoid using the printer with these appliances, we recommend that you 
use a voltage transformer or a high-frequency noise filter. 

Use a voltage regulator if the power source is not stable. 

Environment

■

Make sure that the power outlet is near the machine and is easy to get to so that, if there is an 
emergency, it can be easily unplugged.

■

Only use the printer within the following ranges of temperature and humidity:

Temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)

Humidity: 20% to 80% (without condensation)

■

To avoid ozone building up, put this machine in a large well-ventilated room.

■

Put the printer on a flat, horizontal surface. 

■

Keep the printer clean. Do not put the printer in a dusty place. 

■

Do not put the printer where the ventilation hole of the printer is blocked. Keep a gap of approximately 
100 mm (4 in.) between the ventilation hole and the wall.

■

Do not put the printer in direct sunlight. If you have to put it near a window, use a blind or a heavy 
curtain to protect the printer from direct sunlight. 

■

Do not put the printer near devices that contain magnets or generate magnetic fields.

■

Do not subject the printer to strong physical shocks or vibrations. 

■

Do not expose the printer to open flames or salty or corrosive gasses. 

■

Do not put objects on top of the printer. 

■

Do not put the printer near an air conditioner.

■

Keep the printer horizontal when you carry it.