Media Type; Thick Paper; Thicker Paper- Page 26

2. Printing Methods

 18

e

Put paper in the MP tray. Make sure that the paper stays under the maximum paper mark (

b

) on both 

sides of the tray.

Note

• Envelope joints that are sealed by the manufacturer should be secure.
• The side to be printed on must be face up.
• All sides of the envelope should be properly folded without wrinkles or creases.

f

While pressing the paper-guide release lever, slide the paper guide to fit the paper size.

g

Send the print data to the printer.

Note

• Remove each sheet or envelope at once after printing. Stacking the sheets or envelopes may cause the 

paper to jam or curl.

• If envelopes get smudged during printing set the 

Media Type

 to 

Thick Paper

 or 

Thicker Paper

 to 

increase the fixing temperature. To adjust the print density setting, see 

Printing on thick paper, labels and 

envelopes

 on page 16.

• If the envelopes is creased after they are printed, see 

Improving the print quality

 on page 105.