Adjusting the Label Length; Attaching Labels; BEL PRIN- Page 63

1

2

3

4

5

6

7

8

9

59

z

 LA
BEL PRIN

TING

Adjusting the Label Length

You can adjust the length of the printed label in levels of -5 to +5.

Press the 

Setup

 key to display the setup menu, select "Adjust Length" using the 

 or   key, and then press the 

OK

 or 

Enter

 key.

Select "Adjust Length" by using the   or   key, and 
then set the value by using the   or   key.

Press the 

OK

 or 

Enter

 key to apply the setting.

If necessary, trim the printed label to the desired shape and length using scissors, etc.

Peel the backing from the label.

Position the label and then press firmly from top to bottom with your finger to 
attach the label.

Adjusting the Label Length

1

2

3

• Press  the 

Escape

 key to return to the previous step.

• Press  the

 Space

 key to set the value to default setting.

• Approximately 1% of the total label length will be adjusted by 1 level.

Attaching Labels

1
2
3

• The backing of some types of tapes may be pre-cut to make it easier to peel the backing.To 

remove the backing, simply fold the label lengthwise with the text facing inward, to expose 
the inside edges of the backing. Next, peel off the backing one piece at a time.

• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel 

off easily from these surfaces.

• Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive 

Tapes or other special tapes and observe all precautions noted in the instructions.