The P-touch stops ; while printing a label.; The label is not cut - Page 78

TROUBLESHOOTING

74

What to do when...

The P-touch stops 
while printing a label.

• Replace the tape cassette if striped tape is visible, as this 

indicates that you have reached the end of the tape.

• Replace all batteries or connect the AC adapter directly to 

the P-touch.

The label is not cut 
automatically.

Check that the Cut Option setting is not set to Chain or No Cut, 
as the tape will not be fed after printing the label. Alternatively, 
hold down the 

Shift

 key and press the 

Preview

 key to feed 

and cut the tape.

Label files saved 
previously are now 
empty.

All files stored in the internal memory are deleted if the 
batteries are weak or the AC adapter was disconnected.

Problem

Solution