Confirm your wireless network setup method; Configuration using the machine’s control panel Setup Wizard to configure your wireless network machine; Configuration using the SES/WPS/AOSS control panel menu (Automatic Wireless mode) (Infrastructure mode only)- Page 35

Configuring your machine for a wireless network

26

3

Confirm your wireless network setup method

3

There are four methods to configure your machine for a wireless network; by using the machine’s control 
panel (recommended), using SES, WPS or AOSS from the control panel menu (Automatic Wireless mode), 
using the PIN Method of Wi-Fi Protected Setup™ or using the Brother installer application. The setup 
process will be different depending on your network environment.

Configuration using the machine’s control panel Setup Wizard to configure 
your wireless network machine

3

We recommend that you use the machine’s control panel to configure your wireless network settings. By 
using the control panel 

Setup Wizard

 function, you can easily connect your Brother machine to your 

wireless network. You must know your wireless network settings before you proceed with this installation. 
See 

Using the Setup Wizard from the control panel

 on page 29.

Configuration using the SES/WPS/AOSS control panel menu 
(Automatic Wireless mode) (Infrastructure mode only)

3

If your wireless access point (A) supports either SecureEasySetup™, Wi-Fi Protected Setup™ (PBC

1

) or 

AOSS™, you can configure the machine without a computer. See 

Using the SES/WPS/AOSS control panel 

menu to configure your machine for a wireless network (Automatic Wireless mode)

 on page 32.

1

Push Button Configuration

A