Improper Setup; Installing the Driver & Software; a keyboard or a non-powered USB hub. - Page 17

Installing the Driver & Software

15

W

in

dow

s

®

US

B

Windows

®

8

When the Brother MFL-Pro Suite Software 
License Agreement window appears, click 

Yes

if you agree to the Software License 
Agreement.

9

When this screen appears, go to the next step.

10

Open the scanner cover to its open position.

11

Connect the USB cable to the USB socket 

marked with a 

 symbol. You will find the 

USB socket above and to the left of the ink 
cartridge slots, as shown below.

12

Carefully route the USB cable through the 
trench and out the back of the machine as 
shown below.

Improper Setup

• DO NOT connect the machine to a USB port on 

a keyboard or a non-powered USB hub. 
Brother recommends that you connect the 
machine directly to your computer.

• Make sure that the cable does not restrict the 

cover from closing, or an error may occur.

13

Lift the scanner cover to release the lock. 
Gently push the scanner cover support down 
and close the scanner cover.

14

Turn on the machine by plugging in the power 
cord.

It will take a few seconds for the installation 
screens to appear.
The installation of the Brother drivers will 
automatically start. The installation screens 
appear one after another. 

Please wait, it will 

take a few seconds for all screens to 
appear.

Improper Setup

DO NOT try to cancel any of the screens during 
this installation.

15

When the on-line Registration screen is 
displayed, make your selection and follow the 
on-screen instructions.