Next ; Step 11; Obtain an IP address automatically - Page 9

8

English

6

The search will display a list of found 
Brother Wireless Devices. Select the 
device you wish to configure and click 
Next.

7

If your network supports DHCP, choose 
Obtain an IP address automatically 
and the NC-7100w will automatically 
obtain IP address information from your 
network.

If you want to manually enter the IP 
address settings of the NC-7100w, 
choose Set static IP address and 
enter the necessary IP address settings 
for your network.

After making your selection, click Next 
and the Wizard will search for available 
wireless networks.

8

A list of the found Wireless Networks 
will be displayed. Select the Access 
Point/Base Station or Ad-hoc network 
you wish to associate the NC-7100w 
with and click Next.

9

If your network is not configured for 
Authentication and Encryption, the 
screen shown will appear. To continue 
installation, click OK.

Go to Step 11.

The NC-7100w supports the 
Automatic Private IP Addressing 
(APIPA) protocol. If a DHCP server 
is unavailable, the NC-7100w will 
automatically assign an IP address 
from the range 169.254.1.0 to 
169.254.254.255.

We recommend that you contact 
your network administrator if you are 
unsure about the correct IP address 
settings.

If the Access Point/Base Station or 
Ad-hoc network does not appear on 
the list, you can manually add it by 
clicking Add. Follow the on screen 
instructions for entering the SSID 
and Channel number.