After the two positioning stickers have been ; detected, the following message appears.; While making sure that the two positioning - Page 19

18

n

After the two positioning stickers have been 

detected, the following message appears.

a

Embroidering area

While making sure that the two positioning 
stickers do not peel off, remove the 
embroidery frame from the machine, and 
then rehoop the fabric. Be sure to hoop the 
fabric so the next pattern and both the 
positioning stickers are within the embroidery 
sewing area. Reattach the frame and press 

.

b

Pattern to be embroidered next

c

Centers of large circles for stickers

d

Embroidery sheet

o

Select the area containing one of the two 

stickers, and then press 

.

→

The camera detects the two positioning stickers.

a

Note

• If the next pattern and the centers of the large circles 

of the two positioning stickers do not fit within the 
embroidering area, use a larger embroidery frame. If 
a larger embroidery frame cannot be used, continue 
to step 

o

, and then refer to “Changing the Position 

of a Sticker” on page 21 to reposition the sticker.

• If the sticker peels off during this procedure, the 

patterns cannot be connected. If this occurs, restart 
the procedure from the beginning.